CoreTech System Co., Ltd. (Moldex3D) is the leading 3D CAE simulation solution innovator for plastic
09/07/2026
Moldex3D Studio's Cooling Channel Loop Wizard provides convenient tools for organizing and editing cooling lines.
Among them, the "Connect Channel Curve" feature helps connect the incomplete cooling channel lines.
Read Step-by-step Guide ⨠ https://reurl.cc/gNvEzR
08/07/2026
Moldex3D Live Webinar on July 15: Applying DOE and AI to Optimize Molding Process Parameters
Join our upcoming webinar to discover:
▸ What various inputs can be incorporated into the DOE for optimization?
▸ How to interpret the outputs from the DOE to make informed decisions in the actual production process?
▸ The application of AI-Optimization tool with Studio.
Free Sign-up ⨠ https://reurl.cc/Z8aYGM
02/07/2026
MHC offers a diverse range of continuously updated features.
Among these, “My Cloud Bank” features the Material Notebook. This allows users to take note of CAE molding analysis results and to organize other information about the material.
Read the tips for using Material Notebook ⨠ https://reurl.cc/r0Mzyb
30/06/2026
In semicrystalline polymers, crystallization is a critical physical process that governs melt solidification and strongly influences flow behavior during injection molding.
Semicrystalline materials undergo a concurrent phase transformation in which ordered crystalline structures develop within the melt.
This crystallization process introduces an additional structural constraint that fundamentally alters the rheological response; therefore, it must be explicitly considered in computer-aided engineering (CAE) simulations.
Read Full Article ⨠ https://reurl.cc/N2V5N6
23/06/2026
How to achieve fast and uniform cooling without compromising the quality?
At the Institute for Polymers and Composites (IPC) at the University of Minho, researchers leveraged simulation and AI to overcome the challenge.
The IPC team successfully transformed weeks of traditional trial-and-error into a structured, data-driven search for the best mold and process designs.
Read Full Story ⨠ https://reurl.cc/xWnG84
18/06/2026
Looking for a smarter way to find the best plastic material alternatives?
Join our upcoming webinar to discover how Material Hub Cloud (MHC) empowers you to evaluate and substitute materials with precision!
Key Takeaways:
▸Features and Benefits of MHC
▸GUI and Use of MHC
▸How to Find Alternatives in MHC
Free Sign-up ⨠ https://reurl.cc/Wb6lyZ
Dive into our on-demand webinar and learn how iSLM leverages AI-powered tools to streamline your workflow.
🔹AI Discovery
Similarity-based project discovery, including Insight Discovery (Pre-design) and Design Discovery
🔹AI Chat
A conversational way to quickly locate relevant project knowledge and references
🔹Auto Launch Workflow Automation
Stream AI Discovery recommendations into Auto Launch
Access full webinar recording ⨠ https://reurl.cc/aXOV9l
Wondering if slicing tools only give you rough results?
Use "Thinkness Distribution Curve" in Moldex3D to gain deeper, accurate insights into the physical properties of your injection-molded part.
Four key benefits you can't miss:
▸Use XY plot to display distribution through thickness—no need to record all nodes information.
▸Offer a wide variety of distribution results, including temperature, pressure, shear rate, fiber orientation, etc.
▸No need to do CT scans to measure fiber orientation distribution through thickness.
▸Eaily export the XY plot data as a CSV file.
Log in to Moldiverse & watch the full video
⨠ https://reurl.cc/0mrAWb
09/06/2026
Join Moldex3D for our live webinar on June 10!
Weld lines and air traps are common defects in the plastic injection molding process.
In this session, our speaker will shed light on effective solutions to these issues.
Key Takeaways:
▸Introduction of Weld Lines & Air Traps
▸Common Solutions to Weld Lines & Air Traps
▸Case Studies
Register now and see you online!
⨠ https://reurl.cc/aXyALZ
04/06/2026
Moldex3D supports 3D HDF5 (including solid mesh, ply, and fiber orientation data) exported from ANSYS ACP for RTM pre-processing.
Local permeability modeling from Multiscale.sim can also be imported into Studio to enable a more accurate RTM flow analysis.
This helps users gain a more comprehensive understanding of the entire process and potential defects.
Read Step-by-step Guide ⨠ https://reurl.cc/0mqY86
| Monday | 08:30 - 17:30 |
| Tuesday | 08:30 - 17:30 |
| Wednesday | 08:30 - 17:30 |
| Thursday | 08:30 - 17:30 |
| Friday | 08:30 - 17:30 |