Fox Fire Factory

V2 ATL’s/Foxhole- these are different from V1 Fox holes primarily in that the have a smaller cutout (slot). I did not plan on making ATL’s with cutouts because the extra milling for tap relief already reduces weight and makes the liners less stable with cutouts. I went back to the drawing board and redesigned my best selling liner design FOXHOLE and reducing the size addressed both my concerns. These weigh a little less than 1.2 oz which is right about where V1’s weighed. They are lighter than solid ATL’s which are about 1.4 oz per set.
And of course my original multi platform liners offer the ability to use Krakens with recommended hardware(CEPHALOMOD, Fox Fire original concept).

Made to order - just hit me up.

V2- RINGERS- these ringers are exactly like TINGERS in that they are thin spacers that only work with “FLOATIES” ( one set of four included). V1 RINGERS were thicc kit style that required thick kit hardware to work. Although I am a very big fan of thicc kits as the make it easier to get your Rep to not tap, I no longer sell them as kits with the appropriate hardware and I think that confuses people, so I made it easier. You ca use v2 ringers (just like tingers) using standard Rep hardware on reps. I recommend using them with my ATL liners but standard setups will work.

If you don’t have ATL’s and want to use Ringers or Tingers on a thick kit, you can purchase an additional set of Floaties from me and stack them! Yes you can use two sets of Floaties stacked and swap out standard hardware to thicc kit hardware and you now have a very acoustic thicc kit!

Krakens on my Cephalomod only work on thicc kits.

As always thanks for the support .
Let’s build something beautiful together. 🦊🔥

These are grade 5 Titanium channel bits housed in a CF polymer sandwhich block.
These are the first of its kind, another FFF original concept! The idea is to make more affordable options and to make other platform blocks that will accept these zingers. This Listing is for Rep or Cephalomod only.

Runs on Thicc kit:
Recommended hardware is .188” long shoulder pins for Rep or .312” length dowel pins (.125” thickness)for Cephalomod(krakens) and .030” washers.
Hardware not included(Available @ thetruelink.com