MACHINE Putters

MACHINE HOG MEGA BLADE 🐗⚙️

The HOG Mid just went dark.

Black anodized, wide-body, and ultra-custom from top to bottom. This build brings the entire MACHINE modular system together:

⚙️ Interchangeable face
⚙️ Mechanical loft spacer
⚙️ Modular putter body
⚙️ Interchangeable fl**ge
⚙️ Adjustable fl**ge weighting
⚙️ Beefy full-offset plumber’s neck
⚙️ Matching Upper & Lower Delta Mods for mechanical adjustability

That oversized aluminum plumber’s neck was designed specifically to match the proportions of the wider HOG Mid body—and it still accepts our Delta Mod technology for mechanically adjusting the setup.

Face. Spacer. Body. Fl**ge. Weights. Hosel. Delta Mods.

Change it. Tune it. Build it your way.

This level of modular putter customization is what MACHINE is all about. 🐗⚙️

📍Milled in USA. Made in Texas.

INTEGRATED ELEGANCE 🖤✨

Sometimes the simplest combinations make the biggest statement.

This custom MACHINE M10 pairs a deep black oxide finish over 303 stainless steel with warm bronze/brass-toned accents across the hosel, medallion and medallion screws. 🖤🟤

Everything ties together—from the head to the hardware—giving this build just a hint of autumn flair without taking away from the clean, traditional look of the M10. 🍂

Simple. Clean. Elegant. And completely custom.

That’s the beauty of MACHINE. Materials, finishes, hosels, hardware, medallions, shafts, weighting—the combinations are nearly limitless.

⚙️ Milled in the USA. Made in Texas.

📍 Book your MACHINE fitting at Integrity Golf Performance in Frisco, Texas.

🐗 MACHINE HOG — OLD SCHOOL SHAFT. NEW SCHOOL ZTX. ⚙️🔥
Sometimes the coolest builds happen when vintage HOG technology collides with modern MACHINE engineering.
This custom M12 ZTX Zero Torque mallet is paired with an original 1-inch-wide, non-tapered HOG graphite shaft, manufactured by Aldila / G. Loomis. At a full inch wide, this is about as massive—and unmistakable—a graphite putter shaft as golf has ever seen. 🐗
And when you combine that shaft with the geometry and weighting of the M12 ZTX, something pretty wild happens.
⚖️ Face up.
🎯 Face toward the target.
⬇️ Toe down.
↔️ Or almost anywhere in between.
Set it in a position and it just seems to stay there. We’re calling it infinite balance.
Shaft diameter, shaft weight, hosel location, offset and the relationship of the shaft axis to the putter's center of gravity all influence how a putter wants to balance. Face balanced, toe hang, toe up, lie-angle balanced/zero torque—they’re all different results of those variables.
And there's another piece of MACHINE technology hiding in plain sight. 👀
This build uses a double-wide loft spacer setup—two 1° loft spacers stacked together. Besides creating a really cool, wider alignment feature at address that visually complements the massive 1-inch HOG shaft, the spacers are doing real mechanical work.
⚙️ 1° + 1° = 2° of mechanical de-loft
📐 Result: 1° effective loft
No bending. Mechanically adjusted. That's the MACHINE way.
So you've got original HOG shaft technology, the modern M12 ZTX platform, MACHINE face technology, and a double-wide mechanically adjustable loft spacer system all working together.
Vintage HOG DNA. Modern MACHINE technology. One seriously unique putter. 🐗⚙️🔥
And beyond the balance characteristics, the look and feel of this combination are incredible.
Sometimes old technology doesn't get replaced.
It gets MACHINED into something new.

⚫️〰️ MACHINE STRIPE SHOW 〰️⚫️
M12 FTX MALLET
This custom MACHINE M12 FTX — Flat-Top X-CHANGER is getting prepped, and the alignment package is impossible to miss. 👀
The customer wanted some extra help visually lining up the putter, so we went all in: 10 alignment lines on each side of the main center line — creating a bold, highly defined reference from address. 🎯〰️〰️〰️
The rest of the build stays dark and clean:
⚫ Black oxide finish
⚫ Black anodized aluminum
🔩 Half-offset plumber’s neck
🔄 Modular X-CHANGER hosel system
🏁 BGT / Breakthrough Golf Technology shaft — all black
Black on black, with a whole lot of STRIPE. 🖤
Built specifically for the player. Built to give the eyes a better reference. Built with the adjustability and modular technology that defines MACHINE Putters.
STRIPE SHOW. 🎯
Now line it up and roll it.

🐗 HOG: THE BIG BAD BLADE 🐗🖤

The MACHINE HOG Wide Body Blade has reached its final form — and everything about it is BIGGER, BEEFIER and built to perform.

Think of it as a blade on steroids. 💪🐗

This final go-to-market configuration brings together the latest MACHINE components, technology and hardware into one serious Mega Blade.

🔩 NEW Beefy Plumber’s Neck Hosel — specially designed and proportioned for the massive HOG profile. Bigger, thicker and finally the hosel that visually completes this putter.

⚙️ Patented X-CHANGER Technology — modular shaft/hosel connection with the ability to mechanically configure and fine-tune the setup.

🔺 Upper + Lower Delta Mods — patented mechanical adjustability for dialing in loft, lie and lean.

🧪⚙️ TOTAL PROTO ⚙️🧪

A look at something new coming out of MACHINE. 👀

This is a MACHINE M10 Center Shaft Thick Face Prototype, machined from 303 stainless steel with a polished finish and VMG face mill grooves.

But the real story is in the setup. 🔬

This prototype uses a bore-in shaft post combined with our new Mini Upper Delta Mod — bringing mechanical adjustability to a bore-in center-shaft configuration.

⚙️ Adjust lie, lean, and setup
📐 Mini Delta Mod options for 1° or 2° adjustment
🔩 Clean, direct bore-in shaft design
✨ Polished 303 stainless steel
〰️ VMG face mill grooves
🧪 Thick Face M10 prototype

Simple looking from the outside. A whole lot of MACHINE technology underneath.

Still a TOTAL PROTO for now… but not for long. 👀🔥

Coming soon. Consider these the teaser photos.

⚫ UNFAMILIARLY FAMILIAR. UNCOMFORTABLY COMFORTABLE. ⚙️

The M3A Adjuster Wide Body — familiar blade DNA, pushed into a completely different setup.

Machined from 6061 aluminum and finished in black anodize, this build pairs a Zero Torque, full-offset slant neck hosel with serious perimeter weighting for stability through the stroke.

⚫ 6061 black anodized aluminum
⚙️ Zero Torque configuration
🔩 Full-offset slant neck hosel
🏋️ Extreme adjustable weighting
⭕ BIG BORE weights — built for major weight changes and serious tuning

Different where it matters. Familiar where you want it.

Get you some. 😎
Contact us for details.