What are the opening hours?

Monday 8am - 8pm Tuesday 8am - 8pm Wednesday 8am - 8pm Thursday 8am - 8pm Friday 8am - 8pm Saturday 8am - 8pm

Munden's Six-Gun Magic by Jeff Ault

Home
United States
Butte, MT
Munden's Six-Gun Magic by Jeff Ault

We Customize C**t SAA, Clones, R***r SA + 1911 Triggers
Info & Costs at Bob Munden website. WE DO NOT SELL GUNS or PARTS He also tunes 1911s.

By customizing, Jeff Ault builds Option #1 and Option #2 single-action revolvers. Read about available services and see price list at http://www.bobmunden.com/pricelist-six-gun-magic/. Also check out: facebook.com/sixgunmagic

Munden is the first word in the name because Jeff customizes single actions exactly as Bob did. Trust Jeff with your C**t SAA, C**t clone, R***r SA or your 1911 and you will be very glad you did. facebook.com/sixgunmagic

We update the Munden's Six-Gun Magic by Jeff Ault FB page frequently. We also add content to the official Bob Munden fan page: www.facebook.com/bobmundenfanpage

See you on the range! -- Becky Munden

09/21/2026

Have been making hay while the sun shines:

08/04/2026

Here’s a pair of R***r, Birdshead Vaqueros in .45 C**t I recently completed OPTION #1 PACKAGE on. Plus, I honed and polished the cylinder chambers.

Surprisingly, I didn’t have to take down the front sight on these guns. Straight from the manufacturer, Vaqueros usually shoot very low.

A nice pair of shooters indeed. — Jeff Ault

BobMunden.com/Custom-Gunsmithing

08/02/2026

Posing with one of my favorite rifles at the 2026 Montana State Silhouette Match in Butte. It is a 1943 Re*****on 03-A3 with a Montana Vintage Arms 10x scope with Unertl mounts, a Criterion four-groove barrel and a lightened trigger, which I did myself. This is a very accurate rifle, more than capable of shooting sub MOA groups out to 500 meters if I do my part and hand load with the correct bullet weight, and hold steady.

As much as I like single actions and 1911s, I also like using this high power rifle, especially in steel silhouette matches. — Jeff Ault

BobMunden.com/Custom-Gunsmithing

07/30/2026

If you send your single action in for option work, I strongly recommend our cylinder chamber polishing and honing as an upgrade. This service allows for a smoother, easier extraction of your spent shells.

A polished and honed cylinder is a nice enhancement to have at the unloading table. After all, nobody wants to see you struggling unloading your fired brass at a Cowboy Action match. — Jeff Ault

BobMunden.com/Custom-Gunsmithing

07/27/2026

One step I do when tuning a 1911 is turning the mainspring cap in the lathe to remove burrs. This polishes and sizes up the top of the cap as it moves up and down in the mainspring housing. I also hone the inside of the mainspring tunnel. These two things enhance smoothness shot after shot.

It’s a small detail but still an important one. — Jeff Ault

07/24/2026

Another group of C**t Single-Actions Revolvers we recently customized. One consecutively numbered pair, NIB, received our Option #2 Race Customization Package. On the others I did Option #1 work.

Nothing beats a C**t for good, recreational fun including Cowboy Action Shooting, Cowboy Fast Draw, or Open Class Fast Draw. Find more information and prices on our website below:

BobMunden.com/Custom-GunsmithingOption

07/16/2026

This is not an an Option #2 race gun but a very nice .44 special I customized with our Six-Gun Magic coil main and handspring conversions. I also honed and polished the cylinder chambers.
These 5 1/2” .44 specials point nicely and have a slightly hefty feel to them, which I like.

I think I could have gotten a tighter group, but I seem to see the sights better on blued guns. The nickel front sight super shines in bright light. This C**t SAA delivers spot on accuracy. — Jeff Ault

BobMunden.com/Custom-Gunsmithing

06/06/2026

Single-action revolvers recently customized and returned to happy Munden's Six-Gun Magic customers

BobMunden.com/Custom-Gunsmithing

05/08/2026

Customized. Which one is your favorite?

05/01/2026

When I'm cutting a forcing cone I just “kiss” it at an 11 degree pitch. That's all you need to send the bullet on it's path down the barrel and enhance accuracy. You're doing more harm than good if you really lay into the reamer and seriously open up the forcing cone, because a bullet and with a hot powder charge behind it could blow out around the cone and not use propellant efficiently. There’s no fixing an over-cut forcing cone. I cut it lightly. If there has been some erosion over time, I can always re-cut the cone to make it like new. You can’t do that if the cone has been heavily cut on. Remember, more is not necessarily better when it comes to customizing single actions. — Jeff Ault

BobMunden.com/Custom-Gunwork

Address

1621 Sampson Street
Butte, MT
59701

Opening Hours

Monday	8am - 8pm
Tuesday	8am - 8pm
Wednesday	8am - 8pm
Thursday	8am - 8pm
Friday	8am - 8pm
Saturday	8am - 8pm

Telephone

+14064942833

Website

https://www.BobMunden.com/Custom-Gunsmithing

Alerts

Be the first to know and let us send you an email when Munden's Six-Gun Magic by Jeff Ault posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Munden's Six-Gun Magic by Jeff Ault:

Want your business to be the top-listed Gym/sports Facility in Butte?