Chase Bays

is building his first Schassis and we're here for it. Micah has always had good style, so we can't wait to see the finished product. It's already shaping up to be such a rad car.

Micahs KA-T S13 is equipped w/
• Dual Piston Brake Booster Delete with Bolt-On 6:1 Pedal Ratio
• Brake Line Relocation for Dual Piston
• Power Steering Kit
• Caliper Brake Lines Extended for Drift
• Clutch Line
• Clutch Master Cylinder Adapter
• Reverse Mount Hydro Handbrake
• Hydro Handbrake Brake Line Kit

Follow along with the build over on Micahs Instagram and Youtube Channel!

Shop our entire Nissan S-Chassis catalog at ChaseBays.com

The Chase Bays Power Steering Kit for the 2002–2007 Subaru WRX/STI has been one of our top-selling power steering kits since its release.

The factory Subaru power steering system is known for leaks, fluid spillover, aging rubber hoses, and excessive heat when the car is driven hard. Our kit replaces the weak points with a complete upgraded system designed for better reliability, cleaner routing, and a much better-looking engine bay.

Instead of piecing together upgrades, the Chase Bays kit replaces the factory reservoir and power steering hoses with a complete AN-based setup from the reservoir to the pump, pump to rack, and through the cooler when equipped.

The result is a cleaner, more durable system built to handle everything from daily driving to track days and drifting without the mess and headaches commonly associated with the factory setup.

This Power Steering Kit is available with or without our Power Steering Cooler, However we always recommend adding one. Keeping power steering fluid temperatures under control helps maintain consistent steering feel and reduces unnecessary stress on the entire system.

We have seen our kit installed on many other model/year Subarus, however we only have confirmed fitment on 02-07 WRX/STi as of now.

Shop our full catalog of Subaru products at ChaseBays.com.

NEW PRODUCT!!!

The Chase Bays ABS Brake Lines for Dual Piston Brake Booster Delete now available for the Nissan Silvia S15

This kit is designed to connect the Chase Bays Dual Piston Brake Booster Delete directly to the factory ABS system while replacing the bulky and difficult-to-route factory brake hard lines in the engine bay.

The factory lines are upgraded with flexible -3AN stainless steel braided, PTFE-lined, black PVC-coated hoses and high-quality stainless steel fittings. The result is a cleaner engine bay, easier installation, improved serviceability, and routing designed specifically for the S15. We have designed the lines to route similar to OE unlike our ABS Delete kits that we rethink the routing for better aesthetic and heat management. ALWAYS install and secure lines to keep them 4” or more inches away from manifolds and downpipes.

Every line is assembled and pressure tested in-house to ensure reliable, leak-free performance when installed correctly.

Built for drivers who want the improved pedal feel, control, and engine-bay simplicity of our Dual Piston Brake Booster Delete without removing the factory ABS system.

Available now at ChaseBays.com.

Our love for the ZN6 / ZN8 chassis runs deep. After MANY years of drifting and creating products for the vehicle, we believe this chassis is the EASIEST to work on, can be set up for INSANE levels of grip in drift and road race/time attack, and can be as stylish as the legacy chassis we know and love like the S chassis, R34, or JZX100. We are stoked to be taking part in building its legacy too. It's a regular on drift and track podiums, has won D1 and Driftmasters championships, and still maintains a big street style movement that we believe is as important as the former.

We decided there should be a guide out there for the people getting into these chassis and searching for info on how to set their cars up and/or what mods they should do and so on. Its very easy to overbuild a car when getting into any form of motorsports, so we broke this up into stage 1, 2, and 3 so as the driver skill gets better, the car can also progress.

Head over to ChaseBays.com to check out the FULL Drift ZN6 / ZN8 Guide!

Building a Lexus IS300? We’ve got you covered.

The IS300 chassis has earned its place as one of the go-to platforms for street cars and drift / track builds, so we built a catalog to match.

From cleaning up the engine bay to upgrading the brake, clutch, steering, and oiling systems, Chase Bays offers a huge lineup of products designed to make your IS300 simpler, cleaner, and more reliable on track.

Some of our most popular products for the IS300 include:
• Dual Piston Brake Booster Delete / Brake Line Relocation for Dual Piston
• OEMC Brake Line Relocation
• Power Steering Kit w/ PS Cooler
• Oil Cooler Block Adapter Kit
• Compact JZ Upper Water Neck
• Clutch Master Cylinder Adapter / Clutch Line
• Caliper Lines
• JZ VVTI Line

Whether you’re refreshing old factory components or building the car from the ground up, Chase Bays has the parts to support your IS300 every step of the way.

Shop the full Lexus IS300 catalog now at ChaseBays.com

⏬PRICE DROP ⏬
Chase Bays Oil Cooler Kits

Oil temps climb fast when a car is driven hard, and once oil gets too hot, pressure and protection start to fall off. Keeping those temps under control helps protect bearings, seals, and valvetrain components while maintaining consistent performance and reliability.

That’s why an oil cooler is one of the most important upgrades for any car that sees track time, drifting, road racing, or aggressive street driving.

Chase Bays Chassis Specific Oil Cooler Kits take the guesswork out of the install with proper cooler sizing, clean routing, chassis-specific mounting, AN plumbing, and a Thermostatic Oil Sandwich Plate for proper warmup.

We currently offer chassis/engine-specific kits for:

Nissan S13 / S14 / S15
• SR20DET
• KA24DE
• CA18DET
• RB20 / RB25 / RB26
• 1JZ / 2JZ
• Honda K-Series

Toyota 86 / GT86 / GR86 / Subaru BRZ
• FA20
• FA24
• Honda K-Series

BMW E36
• S5X / M5X
• 1JZ / 2JZ

BMW E46
• S5X / M5X
• 1JZ / 2JZ

Nissan 350Z / Infiniti G35
• VQ

If you drive your car hard, managing oil temperature isn’t just about keeping it cool. It’s about keeping the engine protected and performing the way it should.

Learn more at ChaseBays.com

The Nissan Skyline R32, R33, and R34 need no introduction. These cars have been built, raced, drifted, modified, and pushed for decades and they’re still some of the most desirable performance chassis out there.

Our Nissan R-Chassis catalog is built around upgrading the systems that matter while cleaning up what Nissan gave us. Braking, power steering, clutch hydraulics and engine oiling. We’ve developed solutions for the chassis and the RB engines that power them.

Some of our most popular R-Chassis products include:
• OEMC Brake Line Relocation
• Dual Piston Brake Booster Delete
• Brake Line Relocation for Dual Piston Brake Booster Delete
• Caliper Lines
• Power Steering Kit
• Clutch Master Cylinder Adapter
• Clutch Line
• Oil Cooler Block Adapter
• RB Cylinder Head Oil Drain Kit
• HICAS Delete Power Steering Pump Block Off

Whether you’re keeping your Skyline close to its roots or completely transforming it into a purpose-built car, we’ve got a growing catalog of parts designed to make the entire setup cleaner, simpler, and ready to be driven hard.

Explore the FULL Nissan R-Chassis catalog at ChaseBays.com.

Designed around the demands of drifting, our Hydro Handbrake provides precise control when you need it most. However, any Hydro Handbrake is only as good as the system behind it.

The Chase Bays Hydro Handbrake and Handbrake Line Kits are designed to work together as a complete setup, giving you consistent lockup, better modulation, and a much cleaner way to integrate a hydro into your car. Your OEM handbrake and cables are more than likely worn from years of abuse, requiring frequent adjustment and hoping for the best on every pull.

Depending on the chassis and setup, we offer both Inline / Pass-Thru kits for using your existing rear calipers and Standalone kits for dedicated secondary rear calipers. Our chassis-specific Handbrake Line Kits take the guesswork out of plumbing and replaces all the old and crusty OEM components with -3AN stainless steel braided, Teflon PTFE lined, black PVC coated lines.

We offer chassis-specific Hydro Handbrake Line Kits for:
• Nissan S13/S14/S15
• Nissan 350Z/G35
• BMW E30
• BMW E36
• BMW E46
• ZN6/ZN8
• Lexus IS300
• Toyota Corolla AE86
• Toyota Chaser/Mark II/Cresta
• C5/C6 Corvette
• Mazda Miata

To complete your setup, we also offer chassis-specific Hydro Handbrake Mounting Brackets for select platforms, designed to give our Hydro Handbrake a solid mounting point while keeping the install clean and straightforward. More chassis-specific brackets are already in the works, and for those not yet developed our steel Hydro Handbrake Reinforcement Plate is HIGHLY recommended for any installation.

Ready for the most complete, consistent, and track-tested handbrake setup? Find your Hydro Handbrake setup at ChaseBays.com

The Honda Civic / Acura Integra platform has been part of Chase Bays since day one.

Long before the catalog grew into what it is today, these chassis helped shape the direction of the brand. They were the starting point for a lot of the products, ideas, and solutions we still build around today.

Years later, the platform is still a major part of what we do. We now offer an extensive lineup of Civic / Integra products designed to simplify the engine bay, improve reliability, clean up outdated systems, and make installation easier.

Some of the most popular options include:
• Power Steering Kit
• Dual Piston Brake Booster Delete
• Brake Line Relocation for Dual Piston
• OEMC Brake Line Relocation
• Clutch Master Cylinder Adapter
• Clutch Line
• Power Steering Delete Kit
• Fuel Line Kit
• Oil Filler Cap

The platform that helped start Chase Bays is still one we continue to support heavily today.

Shop the full Honda Civic / Acura Integra catalog at ChaseBays.com