FAHRT Systems

Built for the long road ahead 🌎🚙
Our latest canopy interior was designed for a 6-foot Toyota Tacoma belonging to our customers from Panama, who will soon be driving this vehicle around the world for the next 6 years..
The build is installed inside an Alu-Cab Canopy Camper and includes a Dometic stand-up fridge with full ventilation, storage above, a hideaway sink, and plenty of organized cabinet space.
Because their route will take them through the Amazon, ventilation was especially important. We incorporated airflow throughout the cabinetry to help manage heat and moisture in demanding tropical conditions.
This Tacoma is ready for one incredible journey.
Follow to see where the road takes them next.

Built for the long road ahead 🌎🚙 Our latest canopy interior was designed for a 6-foot Toyota Tacoma belonging to our customers from Panama, who will soon be driving this vehicle around the world for the next 6 years.. The build is installed inside an Alu-Cab Canopy Camper and includes a Dometic stand-up fridge with full ventilation, storage above, a hideaway sink, and plenty of organized cabinet space. Because their route will take them through the Amazon, ventilation was especially important. We incorporated airflow throughout the cabinetry to help manage heat and moisture in demanding tropical conditions. This Tacoma is ready for one incredible journey. Follow @lostandfoundfilmco to see where the road takes them next. #FahrtSystems #TacomaBuild #ToyotaTacoma #AluCab #kraveautomotive

Our latest JLU build for ! This deisgn has a 60/40 split rear seat delete coupled to our rear baseplate. The customer wanted a drawer cabinet (Cmap Kitchen) that matched the height of their VL45Pro - mission accomplished as we were within .01" We designed the rear storage cubby access to work with their Iceco fridge slide rather than rendering the storage area useless by covering it with a slide we integrate the two to work with what you already have.

Thanks to the folks at .wheel.freedom for the fantastic referral!

Our latest JLU build for @thenomadbrickies! This deisgn has a 60/40 split rear seat delete coupled to our rear baseplate. The customer wanted a drawer cabinet (Cmap Kitchen) that matched the height of their @iceco VL45Pro - mission accomplished as we were within .01" We designed the rear storage cubby access to work with their Iceco fridge slide rather than rendering the storage area useless by covering it with a slide we integrate the two to work with what you already have. Thanks to the folks at @four.wheel.freedom for the fantastic referral! @icecofreezer

Another 6th Gen 4Runner drawer system out the door for - amazing folks to deal with. Thanks to the folks for the excellent referral!

This system features an assymetrical drawer system with a alrge gear drawer ont he driver side and a narrower camp kitchen drawer on the passenger side. We also designed the setup to work with the custoemrs already owned tilting fridge slide while also ensuring the customer could upgrade to a medium or large fridge slide in the future if they wish... without interferring with the Camp Kitchen drawer. Everything easily within reach. Takes 2 muintes to setup and 2 minutes to tear down - spend more time relaxing or whatever vs. throwing your stuff in the rattling totes!

Another 6th Gen 4Runner drawer system out the door for @livinfulltilt - amazing folks to deal with. Thanks to the folks @kraveautomotive for the excellent referral! This system features an assymetrical drawer system with a large gear drawer on the driver side and a narrower camp kitchen drawer on the passenger side. We also designed the setup to work with the customers already owned @alucab_official tilting fridge slide while also ensuring the customer could upgrade to a medium or large fridge slide in the future if they wish... without interferring with the Camp Kitchen drawer. Everything easily within reach. Takes 2 muintes to setup and 2 minutes to tear down - spend more time relaxing or whatever vs. throwing your stuff in the rattling totes!

Massive two-tier 4th Gen Tacoma rear seat delete system for - this build privdes a ton of storage!

The lower section holds a Bluetti Elite 300 power bank as well as the DC/DC charger from The system was designed to provide cold air from the Tacoma floor AC duct to the Bluetti section. A must have as this rig is quite literally on a gloabal adventure including the Amazon Rainforest where +40c and 95% humidity is a real thing.

The upper section (passenger side) holds the EvoS portable toilet which is easily accessed throught eh side door. This is so that when the shower cuge is deployed the toilet is easily accessible. The toilet can also be taken inside the rear of the truck for those nighttime callings - if you don't have those yet, wait... they're on their way hahaha!

The opposite side of the upper sotrage space provides enough room for the .canada Wave3 airconditioner and all associated ducting.

All compression latches are key locking.

Huge shoutout to for bringing us along on this journey of a build! The caniopy interior build-out was posted previously.

Massive two-tier 4th Gen Tacoma rear seat delete system for @lostandfoundfilmco - this build provides a ton of storage! The lower section holds a Bluetti Elite 300 power bank as well as the DC/DC charger from @bluetti_canada The system was designed to provide cold air from the Tacoma floor AC duct to the Bluetti section. A must have as this rig is quite literally on a gloabal adventure including the Amazon Rainforest where +40c and 95% humidity is a real thing. The upper section (passenger side) holds the @mytrelino EvoS portable toilet which is easily accessed throught eh side door. This is so that when the @alucab_official shower cuge is deployed the toilet is easily accessible. The toilet can also be taken inside the rear of the truck for those nighttime callings - if you don't have those yet, wait... they're on their way hahaha! The opposite side of the upper sotrage space provides enough room for the @ecoflow.canada Wave3 airconditioner and all associated ducting. All compression latches are key locking. Huge shoutout to @kraveautomotive for bringing us along on this journey of a build! The caniopy interior build-out was posted previously.

Built for the long road ahead 🌎🚙
Our latest canopy interior was designed for a 6-foot Toyota Tacoma belonging to our customers from Panama, who will soon be driving this vehicle around the world for the next 6 years..
The build is installed inside an Alu-Cab Canopy Camper and includes a Dometic stand-up fridge with full ventilation, storage above, a hideaway sink, and plenty of organized cabinet space.
Because their route will take them through the Amazon, ventilation was especially important. We incorporated airflow throughout the cabinetry to help manage heat and moisture in demanding tropical conditions.
This Tacoma is ready for one incredible journey.
Follow Lost & Found | Travel Series to see where the road takes them next.