Crawford's Crosshairs Professional Gunsmithing

Have a little "whoopsie poopsie" on the quad? We can make it right. in snapped in half, reassembled. The beautification of this one will happen at a later date, this is purely a structural repair.

We have an antique in a mark III. Nothing wrong with it other than a little rust on the internals and about 108 years of grime. Cleaned up, polished out and ready to roll!

in the m1 Carbine stock looks pretty slick, especially after the wood restoration has been done here. Cleaned it up big time and ensured the colour won't wipe off with use!

******er 1906 pump 22 in the shop this week. Stock was mangled and forearm was snapped right in half. Got her cleaned up and refinished, did the metal with matte black while we were at it, plus replaced a couple broken parts inside. Works like a dream now!

This is what happens when you use axle grease to lubricate your fi****ms It turns into a plastic like hard substance that needs to be removed with the dental pic. It is very time consuming and very costly for the client, just use Gun oil to lubricate your fi****ms! Save yourself the headache and the big bill.

This one took a long time! A ******er 1892 from 1897 was missing most of its internals and can cracks throughout the receiver. Got all the missing parts replaced, cracks repaired and then refinished the whole r***e with looks pretty great now!

Wi******er model 96 in to have the length of pull increased, the wood reshaped then refinished installed a new recoil pad, plus repaired some light strikes and evening on the trigger guard! Looking great now and feels good in hand!

******er

Re*****on 870 with some rust speckling along the rib and receiver. Blasted all that away and coated with some rustic bronze. Photos really don't do it justice.

Make sure you follow so you don't miss out on any upcoming deals!
www.crawfordscrosshairs.com
canadian fi****ms gunsmith gunsmithing 9mm 40cal 45auto 22lr duracoat duracoatthatsh*t canadiangunnutz shoplocalairdrie