OpenArc Hobby-Gym

Free online Timeline building tool. Register now and create hundreds of Timelines for free. Don't forget to share your Timelines with your family and friends 😎

Register -> https://timelineme.com/app/register

Build your own wall display with a Raspberry Pi

Build a wall display with an old monitor and a Raspberry Pi Breathe new life into an old monitor with a DIY Raspberry Pi wall display.

Test flight #2 was much more successful.

It turns out APMs does not play well with Altitude Hold mode during take off. Take offs should be made with the Stabilize mode.
The modified Nova was able to take off successfully this time, and flew around for a bit. There's still some banking to the left, which we should be able to tweak out.
The main problem this time however was my inexperience in the Nova's handling, and crashed it on to a concrete pillar. Note-to-self: select a place with more space for test flights.
There's a crack in the Nova's housing after the crash, but that should be fixable.

Ok, so the first flight of the modified Nova didn't go so well. Had a minor crash when it flipped and the motors didn't cut off as expected.

Looks like the ESCs aren't calibrated correctly, or some parameters needs tweaking in the Altitude Hold mode.

The Quanum Nova Pro uses an APM (ArduPilot Mega) as it's flight controller. So, the inputs are in the order, Aileron, Elevator, Throttle, Rudder, Auxiliary (3-Way Switch)

Selecting the Correct Gauge Wires for your RC Models The gauge of the wires used for an RC model should support the amount of current that's going to go through them. Here's how you can select the correct gauge.

The Nova is using the horizontal servo plug technique, i.e. plugging a single servo plug horizontally across the signal pins of 3 channels (here, across elevator, throttle, and rudder channels)

Taking apart a APM based drone.

This one is the Quanum Nova Pro.
The plan is to swap out the stock receiver of the Nova with a FlySky i6S receiver.

What are the correct components to build a multicopter with DJI NAZA-M Lite and F550 Frame?

Picking Components for NAZA-M Lite and F550 Frame Selecting the correct/matching motors, ESCs, propellers, and batteries for NAZA-M Lite and F550 frame.

How propeller sizes are numbered may be confusing to someone new. Here's a quick guide to understand the numbers, and how pitch works.

What do the prop size numbers mean?