jmoa__parts

92 syncro with 184.000 kms on the body. A few years ago i put a motor and transmission from a 98 jetta tdi.

Lots of new parts on it.

Front windshield, dual piston calipers and carriers, all 4 shocks( rear are monroe syncro fitment specific), rebuilt steering rack, b4 radiator and a/c condenser.

Lifted with vr6 auto wagon springs on all 4 corners.

Original syncro 15" rims.

U.s. market vr6 instrument cluster converted to tdi WITH M.F.A.

I built this car to go to alaska in the middle of winter.

I had it running and driving in fwd configuration 3 years ago, then the fuel pump started leaking ( i did the seals on the head) and while working on that i burnt a wire on the engine bay.

The process was to do the diesel swap and drive in fed configuration for 1 year to work out the possible issues, then introduce the syncro to the equation. Well since the fuel pump leak and then electeical mishap, it has not run so i never put the propeller shafts back in or have a custom syncro 1z downpipe fabricated

Oem mk3.5 chrome accents.

The parking brake handle release button should also fit mk3. Passat b3/b4. Potentially corrado and mk2.

The automatic shifter release button will also fit a mk3 and if used with a good condition mk3 shifter head, it could go on a b3/b4 and corrado car.

The mk3/3.5 antenna grommetbIS OEM NEW OLD STOCK.

Asking 25 u.s. for the release handle button; 25 u.s. for the auto shifter button and 100 u.s. for the antenna grommet.

Items are located in Hamilton ontario Canada but can ship worldwide

Oem great condition mk2 automatic shifter head.

It might also fit a vanagon , or mk1 ?

I have had this put away for years. Time to sale

Asking 35 u.s. plus shipping and paypal fee

Item is located in Hamilton ontario Canada but can ship worldwide

Oem b3 wagon rear bumper cover.

NO BUMPER GUIDES ON IT. They were removed for a customer.

1 small hole on the passenger side where the plastic weld of the guide bracket was drilled out.

No broken tabs that lock the cover to the rebar.

Asking 100 u.s. plus shipping and paypal fee

Item is located in Hamilton ontario Canada but can ship worldwide

Oem NOT REPLICA mk4 jetta/ golf sunglass holder in good used condition

DO NOT FIT new beetle

Selling for 50 u.s. plus shipping and paypal each

Items are located in Hamilton ontario Canada but can ship worldwide

03 canadian market 1 owner alh manual golf.

Part out . Items not available

Engine swap with all necessary items.

Manual swap with all related items

Exhaust system or fuel system

Bumper to bumper wire harness swap.

4 doors manual window regulators.

All 4 suspension springs are broken.

Notable items AVAILABLE

ps fender
Grille
Rad support
Tails
Rear bumper
Hatch( a bit of rust on the undsrside by the latch)
Heater box
A/c lines
Door weatherstripping
Rockers to repair your car( 2 or 4 door or wagon ARE THE SAME)

CAR is in Hamilton and will be processed june 14 .

Oem LHD market golf monster mat set.

A bit dirty but NO DAMAGES AT ALL.

Mounting hardware is not shown BUT INCLUDED on the sale.

Asking 120 u.s. plus shipping and paypal fee

Items are located in Hamilton ontario Canada but can ship worldwide

Oem mk3 golf NON EURO market hatches.

3 of them available for pick up in Hamilton ontario Canada or can ship .

Asking 500 u.s. each.

Oem mk2 golf/jetta front bumper cover.

No damages to the textured finish of it.

Ugly blue paint job over an originally red part.

Passenger side bracket is missing.

1 set of tabs that secures the cover onto the metal rebar is broken.

Asking 100 u.s. plus shipping and paypal fee

Item is located in Hamilton ontario Canada but can ship worldwide

B3/b4 upper gloveboxes in canadian market grey and black finish. These can be used on a b4 to delete the passenger front airbag.

No key for any of them. Asking 60 u.s. for grey and 80 u.s. for black .

Door seals for sedan and possibly wagon. B3 and b4 are the same. Asking 30 u.s. each.

Items are located in Hamilton ontario Canada but can ship worldwide